Installing Pure Water Products Washer Filter

Please Call if you have a question.

Pure Water Products

(940) 382-3814

All you need to install the washer filter are two standard washer hoses with female fittings at both ends. Attach one to the hot water inlet of the washer, the other to the hot water inlet faucet.

Then, mount the filter on a wall mount, or stand it behind the washer.

Observing the “IN” and “OUT” markings on the filter, route the water so that it flows from the faucet, thorough the filter and into the appropriate (hot or cold) inlet to your washer.

Turn the water on and check for leaks.